Run the automated tool to swap out the files, configure standard symlinks, and safely remount the updated driver.
Securely bolt the mount module onto the camera body with no lens attached.
Keep their hands on the gimbal, maintaining stability during active shots. 2. Ecosystem Stability mali mount upgrade tool
The resulting vendor_upgraded.img is now ready to be flashed onto your target device using fastboot or standard vendor flashing tools (e.g., RKBatchTool). Troubleshooting Common Errors 1. "Failed to setup loop device"
| Issue | Possible Cause | Solution | |-------|----------------|----------| | | Driver not installed correctly | Uninstall and reinstall the USB driver (look for Mali_USB_Driver.exe in the package). Reboot your computer. | | Error: “Mali_Mount_Upgrade_Tool is damaged” on Mac | Apple’s security settings or incompatible ARM64 build | Right‑click (or Control‑click) on the app icon and select Open . If that fails, use a Windows PC or a Boot Camp installation. | | Progress bar stays at 0% for >5 minutes | Interrupted communication (screen‑saver, USB sleep) | Disable all power‑saving features on your computer. Use a high‑quality USB cable directly connected to the motherboard (avoid hubs). | | Tool reports “No device found” | E‑mount unit not powered, or incorrect USB puck used | Verify that the programming puck is correctly attached. Try a different USB port or computer. | | After upgrade, lens still not focusing | Lens may not have focus stops (e.g., some Sony GM lenses) | Some lenses with “focus‑by‑wire” but no hard stops may not be fully compatible. Check DJI’s official lens compatibility list. | | “upgrade_tool: command not found” on Linux | Trying to use a Rockchip tool instead of the Mali tool | The Mali tool is a GUI application for Windows/macOS – do not confuse it with Rockchip’s command‑line upgrade_tool . | Run the automated tool to swap out the
: Once the progress bar reaches 100%, restart the camera and check the "About" section in the menu to confirm the new version. ⚠️ Common Troubleshooting Connection Failed : Ensure you are using a high-speed data cable ; basic charging cables often fail to recognize the device. Update Loop
The tool has been known to work on:
No. The DJI Assistant 2 is a general-purpose tool for DJI drones and some gimbals. The Mali Mount Upgrade Tool is a specialized utility solely for the Zenmuse X9 E Mount Unit.