Pix-link 300m Firmware Update ((install))

Do not power off the device. Wait at least 10 minutes. Some firmware updates take longer than expected. If the device remains unresponsive after 15 minutes, power cycle it (unplug, wait 30 seconds, plug back in).

A progress bar will appear. The process takes roughly 2 to 5 minutes. Once finished, the device will automatically reboot. Troubleshooting Common Update Failures Pix-link 300m Firmware Update

Firmware is specific to hardware versions (e.g., V1 vs. V2). Do not power off the device

Enter the default login credentials. The default username is and the default password is admin . Step 3: Navigate to the Firmware Upgrade Section Once inside the Pix-Link dashboard: power cycle it (unplug