Disclaimer: This guide is for educational and maintenance purposes for legacy broadcast equipment. Always refer to the specific serial number plate on your unit for exact voltage requirements.
If the camera is not powering on, check the SMPTE fiber cable connections on both the base station and the FA-300L fiber adapter. ikegami bsf-300 manual
| Specification | Value | | :--- | :--- | | | Approx. 7 kg (15.4 lbs) | | Dimensions (WxHxD) | 483 x 66.4 x 405 mm / 19 x 2.6 x 15.9 inches (1.5RU) | | Operating Voltage | AC100V to 240V ±10% (auto-ranging, global compatibility) | | Power Consumption | Approx. 55 VA (base station only) | | Power Supply to FA | 240W max (including cable loss), for powering the camera via fiber | | Operating Humidity | 30% to 90% (non-condensing) | | Compatibility | HDK-73, HC-HD300 (via FA-300/L adapter) | Disclaimer: This guide is for educational and maintenance
Verify reference signal matches (e.g., 1080i Black Burst). Add 75-ohm termination to the loop port. High optical attenuation | Specification | Value | | :--- | :--- | | | Approx
The BSF-300 is a key part of a larger, modular ecosystem. Understanding this ecosystem is helpful when reading the BSF-300 manual, as it is often referenced within the documentation of other products. The table below outlines the main components: