You are using an outdated browser.
Please upgrade your browser to improve your experience.
You are using an outdated browser.
Please upgrade your browser to improve your experience.
Click on in the software menu, then select Send Data To Radio .
The ADMS‑2I software is available in two forms: Adms 2i Ft 8800 Programming Software
Unlike general-purpose programmers, ADMS-2I is designed specifically for the FT-8800's unique architecture. Every setting, from Hyper Memories to ARTS configurations, is accessible through an intuitive interface. Click on in the software menu, then select
: Save your radio's configuration to a file on your PC. If your radio is ever reset or damaged, you can restore your data instantly. : Save your radio's configuration to a file on your PC
| Problem | Likely Fix | |---------|-------------| | “Communication error” or “Timeout” | Check COM port, cable connection, and that radio is in mode. Try lowering baud rate. | | Radio not entering clone mode | Turn radio OFF, then press-and-hold LEFT SET while turning ON. Release SET when “CLONE” appears. | | Garbage data read from radio | Faulty USB-to-serial adapter (try another brand). Also check for bent pins in DATA port. | | Software won’t install on Windows 10/11 | Run installer in Windows 7 compatibility mode as Administrator. |
At around $49 for the software‑with‑cable kit, the ADMS‑2I pays for itself in convenience after programming just a couple dozen channels. The free alternative (CHIRP) can work, but the historical risk of bugs that affect the FT‑8800’s memory structure and the possibility of bricking the radio mean that for mission‑critical use, the commercial product is the safer, more polished choice.
0%
