Connect the RS-232 cable to the rear input of your computer. Note that Windows will likely not show a "New Device Detected" notification; this is normal for serial communication.
The proprietary 3.5mm mini-jack to DB9 (Serial RS232) cable included in the original box.
: A .bin file specifically compiled for the Satlink WS-6906. Step-by-Step Firmware Flashing Guide
Select the .bin firmware file within the tool. Click "Start" or "Upgrade," and then turn on the Satlink WS-6906. The transfer should begin automatically, showing a progress bar on your computer screen.
Connect the 3.5mm jack into the "Data Port" on the side of the Satlink WS-6906 and the RS232 end into your computer. 3. Configure the Upgrade Tool
Connect the RS-232 cable to the rear input of your computer. Note that Windows will likely not show a "New Device Detected" notification; this is normal for serial communication.
The proprietary 3.5mm mini-jack to DB9 (Serial RS232) cable included in the original box.
: A .bin file specifically compiled for the Satlink WS-6906. Step-by-Step Firmware Flashing Guide
Select the .bin firmware file within the tool. Click "Start" or "Upgrade," and then turn on the Satlink WS-6906. The transfer should begin automatically, showing a progress bar on your computer screen.
Connect the 3.5mm jack into the "Data Port" on the side of the Satlink WS-6906 and the RS232 end into your computer. 3. Configure the Upgrade Tool
