Autocraft Battery Charger Ac-60cr Manual ((link)) — Complete & Confirmed

Determine which post of the battery is grounded (connected) to the chassis.

Set all charger switches to the OFF position. autocraft battery charger ac-60cr manual

If the engine does not start, wait at least 2 to 3 minutes for the charger to cool down before attempting to crank again. Failure to do so can melt internal components or trip your household circuit breaker. Reading the Analogue Ammeter Determine which post of the battery is grounded

Connect the RED clamp to the positive terminal of the battery. Negative (-) Connection: Failure to do so can melt internal components

The battery is full, or the charging rate is set too high. Unplug the charger immediately.

The front face of the Autocraft AC-60CR features an analog ammeter gauge, voltage selectors, and a timer switch. Understanding these controls ensures you do not overcharge your battery. 1. Voltage Selector Switch

Connect the clamp to the positive (+) battery post.