Disconnect the internal battery flex cable for 10 seconds to force a hard reset, reconnect it, and boot directly back into BROM mode to re-flash a stock firmware layout.
The bypass tool will detect the device, execute the payload, and output a success log. Look for indicators such as: SLA Disabled: True DAA Disabled: True Protection Disabled! mtk sec bypass free
Connect the device to the PC via USB while holding the buttons. 3. Executing the Bypass Launch your chosen bypass tool. Select the "Disable Auth" The tool should display "Protection disabled" "MTK Secure Boot Bypassed" in the log window. 4. Flashing or Unlocking Once the bypass is active, do disconnect the device. Open your flashing tool (like SP Flash Tool Disconnect the internal battery flex cable for 10
Use the default MTK_AllInOne_DA.bin bundled with SP Flash Tool. Boot Loop after Bypass Exploit payload mismatch Connect the device to the PC via USB